Embossing Machine Convexcontains 72 Characters, Manual Dog Tag Embosser Machine, with 30 Aluminum Dog Tag, Code Printer and Embossing Machine for PVC Custom Card

♣♣Specifications:Name: Aluminum Dog TagEmbossing Workpiece: 85.5mm × 55mm Standard PVC Card28×50mm (Dog Tag)Character Selection: Daisy-shaped character wheel72 Built-in Characters:- Uppercase English letters (26): (A~Z)- Uppercase and lowercase Arabic numerals (20): (0~9)- Small symbols (8)- Large symbols (17)- Modify flat symbol (1)Character spacing is two levels: 1/7 inch; 1/10 inch (small characters only)Operation: ManualImprint lines: 1-6 linesImprint position indicator: Indicator pin or templateDimensions (L×W×H): 400×360×245 (mm)Machine net weight: 9 kgMachine gross weight: 10 kg☝☝How to Use:1. Place the card in the card frame and secure it.2. Move the card frame and select the desired position.3. Write on the daisy character plate, using the pointer to select the desired character.4. After completing steps 1-3, crank the handle.5. If the imprinting depth does not meet your needs, you can adjust the bolt in the adjustment hole at the bottom of the machine. You can use the 4th Allen wrench to loosen the bolt, and then use the 8th External Allen wrench to loosen the outer bolt. After adjustment, tighten the bolt.➤Packaging List:1 x PVC Card Imprinting Machine30 x Aluminum Dog Tags1 x Punched Handle1 x Handle Fixing Screw1 x PVC Sample Card1 x Hardware Accessory PackPrecautions:1. Please use 28x50mm aluminum dog tags. Do not use other metals or cars of other sizes;2. When rotating the code wheel, do not press down on the handle to avoid damaging the machine;3. When changing gears, pay attention to the positioning position. If you need to change gears mid-process, gently block the card frame with your left hand to prevent the card frame from moving automatically during gear changes;4. Do not put your hands or other foreign objects inside the machine.